The two photos below show the same machine in two working positions. The M-300C is a portable valve grinding machine for gate valve sealing components and flat valve sealing surfaces, and its adjustable installation structure lets it grind the seat inside the valve and the disc outside it.
The first photo shows the M-300C mounted on a sectioned gate valve in our showroom. The cutaway exposes the valve interior, so the grinding head and its position against the seat are visible. Mounted on the valve body, the machine reaches down to the seat: the maximum grinding depth is 850 mm, and the specified minimum spacing between sealing surfaces is 55 mm.

The second photo shows the other setup: a gate valve disc laid flat, with the machine set up over it at an angle and the grinding disc on the disc face. The same machine, a different installation — the adjustable structure adapts to the job. The grinding range of Φ118–430 mm is the diameter of the sealing surface the machine can grind, and the valve size range is DN100–400 (4″–16″). Match the grinding range to the actual sealing surface diameter; the nominal valve size alone does not decide the fit.

The M-300C is powered by a 1,300 W variable-speed electric motor and weighs 78 kg. Before selecting the machine, check the actual sealing surface diameter (Φ118–430 mm), the required grinding depth (maximum 850 mm), and the minimum spacing between sealing surfaces (55 mm). Within these limits, the M-300C can be used for both gate valve seat and disc maintenance, as well as flat valve sealing surfaces.